FishCreekSpinners Noise on the Line! Sponsor's Message

[fishcreekspinners]

K Swede, best I can do - 1/8oz Black Minnows - #3 hammered black frenchmen :dj: - black faceted glass - colored discs - splitring attached #6 single black nickel offset VMC hook - $3.25 ea or 4 for $12 bucks






The discs catch the blade, making noise and roll the faceted glass to catch light - should be a solid spinner, stay tuned!

[swedefish4life1]

I Use lots of Black hooks in the salt with your Combo plate:chef: they looked banging and black hooks in most waters with the correct skirts, blades, feathers and trailers become a none impact which in fishing match means more hook ups as the Bite or strikes and is not negative its neutral or positive=both beat chrome!

Mucho Grande:-$

Just like so many tubs I help set up they cannot figure out while they never limit?

After swamping out the hot wire, Dumping the stock downrigger cable, adding power pro 250lb test 400 ft per rigger, adding coated downriggers and getting all the wires back to the correct locations the boats when tested are close to neutral most tups are (hot):cyclopsan in transfering energy to the presentation which is real bad and metal tubs the worse:-$ at this and adding a Black Box will help but not fix the issue.
If all of these factors A- Z are not addressed and corrected the entire package must be Swedebonics:viking: :thumright:rambo: as then the system draws fish in not pushes them away and these spinners are all related to this kind of thinking#-o
Match the Hatch

Not one rear transom before touching the waters they press do not get the Smelly Jelly swipe, river, Ocean or lake to the bait and scent we are pressing, trim tabs, rear motor, kicker and transom.

Setting a spinner, squid, tub and more to be correct takes outside the box thinking on each aspect and if you don't care to be more productive then pass on all I love being a fish boss if now my current game is a key board for know but never count a fighter out we always have the 12th and final Rd to cave your head in!

Love your stuff keep it up and would love to see some color in your spinners as well as far as the hook relating to the body and blade!:-$

Great job Fish On!!!

[VHMLLC]

im taking the whole lot i ordered and have had sitting in my box for allmost a month out to skmakaway (sp) river this weekend (easter) i hope to have some awsome pic's. thanks for the fast shipping. and of corse the ladys in my house think "thats some perdy ear rings you got there" little do they know "thems some fish killers right there' i hope.

[fishcreekspinners]

Got to get em wet! (not the ladies, the spinners!) Hear it all the time, faceted glass is more reflective then plastic and made out of sand, seemed like a good choice to me. The discs protect the glass and also roll it during retrieve for added reflection and vibration against the blade.

I get a lot of 'feedback' about earrings, but the spinners work and can be made to be priced reasonably.

Good luck next weekend and bring back your feedback, fishing reports and fish stories!

Noise on the Line!

[fishcreekspinners]

I just cropped a fish skin banner off some of the digital photos I collect and with Mike and Aaron's help on the launch, replaced the spinner drop. Check out the Rainbow thats wearing FCS ink!

Noise on the Line!

[fishcreekspinners]

Fish Creek Spinners May 2009 Spincast

Marie and I are making a sales trip to Deadwood, SD through Wyoming, and back through Nebraska and will be out of pocket for the Memorial Holiday. If you're thinking about taking advantage of the Washington Lakes discount before the holiday's, consider our availability and get those orders in the pipeline for early arrival!

We've been blessed with a new grandson - Landon Hunter Delaney - 9lbs 11oz whopper! Will and Margot's first.

The F110 and F128 Red and Orange Armadillos have been mentioned in 3 States' DOW fishing reports this year; Washington, Colorado, and New Mexico and the F101 Green Armadillo's are catching crappies like crazy in Missouri. The F700 Hot Rod is catching Tiger Trout in PA and I saw a very nice Steelhead caught on an FCS spinner in one of the Michigan-Sportmans Product Reviews. Thanks for getting the FCS wet and supporting our brand!

Offut Lake Resort is retailing FCS in Washington. Stop by, visit with Rob and Becky and take a look at their spinners, pictures dont tell the whole story. You need to get some in your hand and on your line to appreciate the FCS difference!

I'm going to get the Armadillo blades pad printed with a logo through Lakeland Inc. Here's a picture of the design on some sticker prototypes that I worked up. They look pretty cool to me, can't wait to see them on the brass.




Noise on the Line! We ship fast and free!


John Delaney

[fishcreekspinners]

Here's a deal and something to think about for anyone thats been considering trying some FCS spinners. To get our spinners in your hands and on your line in June, I'll throw in a free AngleIron spinner on orders using the WLROCKS 20% promo code and selecting 4 or more individual spinners. The offer's good for the next 7 days. We ship fast and free!

Here's an AngleIron


and a couple pictures of new copper bladed Small Armadillos





and new dbl bladed HotRod colors, more in the Store.






Noise on the Line!

[fishcreekspinners]

Armadillo six pack. New assortment packaging and special introductory pricing. Use your WL.com promo code for added discount.



FCS Home Page

Have a great time at the fishing derby. Noise on the Line.

[Anonymous]

Just my 2 cents here... These are very well made spinners. Better made than most of the well known brands you find on the shelf, and creative designs.

Lost lake trout:

[fishaholictaz]

I hope to get some BIGGER brookies on mine tomorrow but my Buddie lost the one the browns have been eating#-o

[fishcreekspinners]

Twisted up some Weedless Worm Props, Worm Tuxedos, Worm Headgear, Worm Bling, whatever. The Bass were hitting them in the ponds by the house.

FCS Worm Props

[fishaholictaz]

Man those look great I am saving up for a big (now bigger) order:-"

[Mike Carey]

Twisted up some Weedless Worm Props, Worm Tuxedos, Worm Headgear, Worm Bling, whatever. The Bass were hitting them in the ponds by the house.

FCS Worm Props

John, have you posted this on the Bass Forum? If not, please feel free to do so.

[Chad Bobington]

Cool products! I just want to know if you have any spinners that imitate yellow perch? The trout in the lake I fish get real huge (15-20 in) by feeding on the perch that grow there. (which can also get relatively big)

[fishcreekspinners]

I've made some Armadillos with perch colors (yellow, blue, black - glass or metal beads) that look perch like and sold out of all of them at the Mile High flea market earlier this year. Hmmm, thinking I posted pictures of them in some Forum or in one of the FCS threads in WL.com too.

I have some white spotted bone bodies and could use a indelible fluorescent yellow marker to yellow it up. Putting a blue head bead and big orange tail bead around it. Think I would use a gold ripple or a silver ripple for the blade. If the rainbows are big, you could try the perch minnow I made for muskie although hooks are big. Here is a picture of that.



What I was suggesting would be about 1/6oz, smaller and cheaper like $3, but look alot like that without the double blades, zonker strips and big treble that add cost. Close to what your imagining, perch like.

Anyways, sounds like fun and yes it can be easily done, out on Hiway 61.

BTW, I added some new spinner choices where you mix and match colors on various models from the Custom Spinners category on FCS website. It will let you get color combos that I dont have pictures of.

Custom Build


Click on the thumbnail to see the bigger picture and component choice drop downs. Its a primitive tool that lets you build color combos I dont have pictured for the angler with an idea, pencil and paper and imagination. Just sketch out your idea understanding the components in the model you're looking for, thinking about which colors are important. Then pick your choices. Here's where the imagination comes in.. you dont see the final picture, bummer. When you add to the cart, the entry will list the component choices in sequence to verify it. Remove it if you goofed. No pictures, sorry. We build to that spec and will email you if it something looks questionable. I will send an email picture of the spinners before attaching the hook for orders with several spinners (on request) otherwise you get a surprise in your mailbox in 3-4 days.

The component pages roll about every 5 seconds and there are dropdown boxes listing the various component choices. You choose blade type and color, primary body color, disc color, secondary body color, tail bead and hook type. So for a 1/8oz glass armadillo there will be 5 beads (body all same or two color) and a tail bead choice; 3 colors possible for 1/5oz but only 4 beads.

Big Perch, yummy! They should hit the Armadillos too.


Noise on the Line