Any Prop shops still around?

Talk about your boats, trailers, and boating specific topics here. Sponsored by Life Proof Boats.
Post Reply
User avatar
Larry3215
Admiral
Posts: 1804
Joined: Thu Aug 02, 2012 7:02 pm

Any Prop shops still around?

Post by Larry3215 » Fri Jul 01, 2016 9:35 pm

There used to be a place in Tacoma that did prop repair, re-pitching, refurbishing etc etc, but they have been gone for several years now.

Is there still anyone around that does that stuff?

I suspect that with the low cost of aluminum props these days plus easily replaced hubs, its just not worth the cost to get one re-pitched or repaired.

Id like to drop one point on pitch on my prop but they dont make one that size.

User avatar
G-Man
Admiral
Posts: 2682
Joined: Mon Jul 14, 2008 9:01 am
Location: Bellevue, WA

Re: Any Prop shops still around?

Post by G-Man » Fri Jul 01, 2016 10:02 pm

FYI - re-pitching a prop is not worth the money unless you have a composite prop like a Piranah where you can actually swap out the blades. Your RPM's won't increase, in fact they will probably decrease, and you'll lose top end speed. When a prop is cast, its pitch is permently set where the blades meet the body of the prop. Short of cutting off the blades and welding them back on at a new pitch, all the shop is doing is bending the blades from the middle to the tips. If you are running an aluminum prop now, drop down 2 in a stainless prop and you'll get what you are after, as the stainless props flex less.

User avatar
Larry3215
Admiral
Posts: 1804
Joined: Thu Aug 02, 2012 7:02 pm

Re: Any Prop shops still around?

Post by Larry3215 » Fri Jul 01, 2016 10:52 pm

If the shop knows what they are doing - and you dont push it too far - it can work quite well. It depends on your goals.

I had an aluminum prop repaired and re-pitched by that shop thats no longer there and it worked out fairly well. We had picked up a project boat - an old 72 Glassply with a 350 chevy in it and a Johnson outdrive. I forget the exact details, but after we rebuilt the motor we were not getting the full throttle or cruise rpm we wanted. We had too much pitch and props to fit that outdrive were hard to find.

They repaired some dings and chips in the prop, re-balanced it and took it down one point on pitch. I cant remember of they added some cup or not. They said one point of change in pitch was about all they could do on an aluminum prop - especially one that old.

We picked up some rpms and were reasonably happier with the performance. We didnt pick up any significant speed, but the calculated prop slip was lower, hole shot was better and so was MPG - not by much but still better. In that case it was worth it mostly because we couldnt find a new prop to fit that was even close to the correct pitch for a reasonable price.

Im in a similar situation now. RPM's are ok but definitely on the low side of ideal. Dropping 2 points will probably be too much. I dont care a hoot about top speed. Im more concerned with efficiency and I tend to be anal about things like this. I would like to get closer to the perfect rpm and - hopefully - improve prop slip and efficiency some at the same time.

On the other hand, there is no point worrying about it if there are no shops that do that any more - or if the cost is prohibitive. I dont really want to invest in a stainless prop either. My brothers like to push the limits in shallow/rocky water too often :)

Onmygame
Lieutenant
Posts: 205
Joined: Wed Mar 04, 2015 2:34 pm

Re: Any Prop shops still around?

Post by Onmygame » Sat Jul 02, 2016 12:21 am

It shouldn't be too hard to find a shop in the Tacoma / Seattle area that does prop repair as there should be several. Google 'prop repair' in your home town.

The guy I bought my Lund from told me he had the prop resurfaced after hitting gravel for about $60 if I recall. Am thinking he had Anglers Marine in Tacoma do it. If they weren't the one, they would likely know who to contact.

Prop looks flawless by the way - considering they used a weld of sorts to fill the chips, ground it back down, sanded and painted it. Works great too.

onmygame

User avatar
Larry3215
Admiral
Posts: 1804
Joined: Thu Aug 02, 2012 7:02 pm

Re: Any Prop shops still around?

Post by Larry3215 » Sat Jul 02, 2016 4:57 am

Onmygame - Thanks to you, I am embarrassed by two things.

I often give people a hard time for not Googling or RTFM before asking simple questions in forums - and I didnt follow my own advice! The second is that - now that I did a Google search - Tacoma Propeller is not gone! They just moved! :)

Now to gather my rpm and speed data and go see them next week.....

User avatar
Toni
Sponsor
Sponsor
Posts: 3183
Joined: Mon Apr 30, 2007 10:47 pm
Location: Graham

Re: Any Prop shops still around?

Post by Toni » Sat Jul 02, 2016 5:21 am

Hunter757 just had his prop done within the last two months I think, in Tacoma.
Look for Wannafish A Lure on FaceBook
He said, “Throw your net on the right side of the boat and you will find some.” When they did, they were unable to haul the net in because of the large number of fish.

User avatar
Hunter757
Commander
Posts: 379
Joined: Sat Jul 27, 2013 6:05 pm
Location: Puyallup, WA

Re: Any Prop shops still around?

Post by Hunter757 » Sat Jul 02, 2016 6:18 am

Yes, Tacoma prop is still in business and well they will be moving again in the futures and not sure where yet. They do great work and have a fast turn around time. Good luck Larry hope they can fix you up!
2005 Weldcraft Maverick 182DV
Suzuki DF140
Suzuki DF 9.9
Lowrance elite 7 HDI
Raymarine Ray49 VHF
Cannon Mag 10 HS

User avatar
Hunter757
Commander
Posts: 379
Joined: Sat Jul 27, 2013 6:05 pm
Location: Puyallup, WA

Re: Any Prop shops still around?

Post by Hunter757 » Sat Jul 02, 2016 6:58 am

2005 Weldcraft Maverick 182DV
Suzuki DF140
Suzuki DF 9.9
Lowrance elite 7 HDI
Raymarine Ray49 VHF
Cannon Mag 10 HS

User avatar
Greenfishnut
Petty Officer
Posts: 16
Joined: Sun Sep 21, 2008 6:35 pm
Location: Tonasket Okanogan County

Re: Any Prop shops still around?

Post by Greenfishnut » Fri Nov 11, 2016 8:12 am

The Prop Shop - - Boat Propellers & Accessories
http://www.propshopinc.com/" onclick="window.open(this.href);return false;
This outlet offers an extensive inventory of boat propellers & hardware plus repair services.
Address: 3610 S Rd #100, Mukilteo, WA 98275
Phone: (425) 745-1700
Hours: Open today · 8:30AM–4PM

Post Reply