Jigs Swap?

Post your Jig, Spinners and spoon photos and directions here
User avatar
beresford13861
Warrant Officer
Posts: 155
Joined: Mon Oct 22, 2007 6:55 pm
Location: Riverside, CA
Contact:

RE:Jigs Swap?

Post by beresford13861 » Tue Jan 08, 2008 4:24 pm

do we have a host yet??? i supose i can Miester this one too! let me know...

User avatar
HillbillyGeek
Captain
Posts: 755
Joined: Tue Jan 08, 2008 2:50 pm
Location: Lake Stevens

RE:Jigs Swap?

Post by HillbillyGeek » Tue Jan 08, 2008 4:37 pm

I'll participate in the jig swap! Not sure what pattern yet... :thumright
Piscatory Geekus Maximus

User avatar
YellowBear
Captain
Posts: 629
Joined: Wed May 02, 2007 9:44 am
Location: Potholes

RE:Jigs Swap?

Post by YellowBear » Wed Jan 09, 2008 10:52 am

you can cut cost quite a bit if you purchase material from craft shops instead of the fly shops. Things like yarn, thread and tinsel. As for feathers and fur, I gather most of mine. I get my Bucktails from friends and dye them myself. If you have a leather store near you like Tandy or the leather factory, You can get some pretty good deals on hides from time to time. Just check out there scrap bin.
YellowBear
Life member N.A.F.C.
Angling Masters international
Good luck and be safe

User avatar
gpc
Admiral
Posts: 1773
Joined: Sun Apr 29, 2007 10:01 pm
Location: Sea Tac

RE:Jigs Swap?

Post by gpc » Wed Jan 09, 2008 4:49 pm

I mentioned this before on another thread but another place to get good cheap matterial for fly tying is the $1 store. Feather dusters, they make them in all diffrent colors and for a buck you get a good amount of material.

This is kind of off topic but when the pinks were running pink jigs and hoochies were selling out quick and it was hard to find them some times. My neighbor used his girl friends underwear and tied up a bunch of pink jigs. I know the pinks very easy to catch but in a bind any type of material will get the job done.

User avatar
A9
Rear Admiral One Star
Posts: 3668
Joined: Sun Apr 29, 2007 7:04 pm

RE:Jigs Swap?

Post by A9 » Wed Jan 09, 2008 6:05 pm

gpc wrote: This is kind of off topic but when the pinks were running pink jigs and hoochies were selling out quick and it was hard to find them some times. My neighbor used his girl friends underwear and tied up a bunch of pink jigs. I know the pinks very easy to catch but in a bind any type of material will get the job done.
A little secret but green jigs or all white jigs actually outfished the pink jigs for me this year. Green/white/chartreuse worked, as did mini green hootchie jigs I made....

1/4oz for weight, cast em out, twitch em in the bottom 1/3 of the water column and enjoy catching endless pinks...
Don't chase reports...Be the report others chase....

User avatar
gpc
Admiral
Posts: 1773
Joined: Sun Apr 29, 2007 10:01 pm
Location: Sea Tac

RE:Jigs Swap?

Post by gpc » Thu Jan 10, 2008 4:10 am

Sam Kafelafish wrote:
gpc wrote: This is kind of off topic but when the pinks were running pink jigs and hoochies were selling out quick and it was hard to find them some times. My neighbor used his girl friends underwear and tied up a bunch of pink jigs. I know the pinks very easy to catch but in a bind any type of material will get the job done.
A little secret but green jigs or all white jigs actually outfished the pink jigs for me this year. Green/white/chartreuse worked, as did mini green hootchie jigs I made....

1/4oz for weight, cast em out, twitch em in the bottom 1/3 of the water column and enjoy catching endless pinks...
Yeah I found that I liked the green hoochies as well later on in the year. I just stuck to the basics for the first part of the season, just kind of learning the ropes of pink fishing. Once I got the hang of it, it seemed like I could use anything, and the pinks almost got anoying towards the end. BUT cant for the next run

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Jigs Swap?

Post by panfisher » Fri Jan 11, 2008 12:14 am

i'll tie some jigs that work well for me on crappie/bluegill! <')//<

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Jigs Swap?

Post by panfisher » Mon Jan 14, 2008 9:48 pm

been doing a move so all my stuff for tieing was packed up but i just got all my fishing stuff together and will be making up several different jig patterns soon for us. so i'm going to make up a few dozen and try to put pic's on to entice some swap'n. <')//<

User avatar
tnj8222
Admiral
Posts: 1691
Joined: Sat May 12, 2007 9:42 pm
Location: Renton Highlands
Contact:

RE:Jigs Swap?

Post by tnj8222 » Tue Jan 15, 2008 7:46 am

i have been doing alot of tying. so i got several patterns all ready to go.
Anthony
http://static.photobucket.com/player.sw" onclick="window.open(this.href);return false; ... EO0054.mp4
if everyday was a good day there would be alot more fisherman.

User avatar
HillbillyGeek
Captain
Posts: 755
Joined: Tue Jan 08, 2008 2:50 pm
Location: Lake Stevens

RE:Jigs Swap?

Post by HillbillyGeek » Tue Jan 15, 2008 10:33 pm

Here's the jig I'll be tying for the swap:

Hook: #4 VMC high carbon (red)
Head: 1/16 oz, 2-layer paint - glow over pearl + black eye (sharpie)
Body: White size 2 chenille + green super fluff yarn + red dot (sharpie)
Tail: White marabou

Image
Piscatory Geekus Maximus

User avatar
beresford13861
Warrant Officer
Posts: 155
Joined: Mon Oct 22, 2007 6:55 pm
Location: Riverside, CA
Contact:

RE:Jigs Swap?

Post by beresford13861 » Fri Jan 18, 2008 9:37 am

so this swap is a go or not?
how many tyers max?
whom will host?
what are the specs?

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Jigs Swap?

Post by panfisher » Fri Jan 18, 2008 11:18 pm

right now i will not have the time to host, though i will try to in some future swaps. i'll tie anything but would perfer to keep it in sizes for trout, crappie, sunfish, etc. 6-12? keep in mind there may be a few new to tieing.
as far as i see we have;

hillbillygeek
tnj8222
panfisher
yellowbear "i think"
beresford "poppers" (i'll do poppers on another swap)
iskles "if he can find a vise" hope to swap with you.

would be nice if there could be another host for this one so one person isn't doing it all!

any others interested?

User avatar
lskiles
Commander
Posts: 395
Joined: Fri Jul 27, 2007 9:51 am
Location: Vancouver, USA

RE:Jigs Swap?

Post by lskiles » Fri Jan 18, 2008 11:35 pm

panfisher wrote:lskiles "if he can find a vise" hope to swap with you.
I bought a vice, actually a pretty cool set of tools and a vice in a wooden box from Sportsman's.

I am in if you all do not mind a rookie joining in on the fun!
Last edited by Anonymous on Fri Jan 18, 2008 11:37 pm, edited 1 time in total.

User avatar
HillbillyGeek
Captain
Posts: 755
Joined: Tue Jan 08, 2008 2:50 pm
Location: Lake Stevens

RE:Jigs Swap?

Post by HillbillyGeek » Fri Jan 18, 2008 11:48 pm

[quote="panfisher"]right now i will not have the time to host, though i will try to in some future swaps. i'll tie anything but would perfer to keep it in sizes for trout, crappie, sunfish, etc. 6-12? keep in mind there may be a few new to tieing.
as far as i see we have]

I can do size 6 hooks, no problem-o.
Piscatory Geekus Maximus

User avatar
Marc Martyn
Rear Admiral Two Stars
Posts: 4100
Joined: Sun Apr 08, 2007 1:01 am

RE:Jigs Swap?

Post by Marc Martyn » Sat Jan 19, 2008 1:02 am

lskiles wrote:
panfisher wrote:lskiles "if he can find a vise" hope to swap with you.
I bought a vice, actually a pretty cool set of tools and a vice in a wooden box from Sportsman's.

I am in if you all do not mind a rookie joining in on the fun!
Iskiles-

I don't think that any of us were born with a bobbin in our hands and a vice clamped to the crib. We will all help you if you have any questions about tying. It is a great hobby and you will enjoy it greatly. Oh, BTW, in all the years that I have been tying, I have never had a fish jump up out of the water and say " Sir, that fly of yours isn't tied as nicely as the one I just saw recently":-s

Participate, enjoy and have fun. That is what it is all about.:thumright

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Jigs Swap?

Post by panfisher » Sat Jan 19, 2008 7:10 pm

i still have some jigs and flies that i tied over 25 years ago in my box's and really don't look like what i tie now. they caught fish then and will still catch fish now. if you stay simple you'll learn faster. i'll fish every jig made and post pictures of whats caught! the wife says i have to many stuffed box's but i'm going to keep all swap jigs in one box, <')//<

User avatar
gpc
Admiral
Posts: 1773
Joined: Sun Apr 29, 2007 10:01 pm
Location: Sea Tac

RE:Jigs Swap?

Post by gpc » Sat Jan 19, 2008 7:58 pm

Tying flys and jigs are great. Its not cheap to get started but you will save $ in the long run, when its all said and done, and a pricless hobby. Cabelas has a HUGE amount of material.

This weekend they have the sportmans show in Puyallup. I highly recomend any 1st time fly tiers to attend. They have tons of material and seminars that go almost all day on tieing flys.

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Jigs Swap?

Post by panfisher » Fri Jan 25, 2008 5:31 pm

here are 6 jigs for the swap:
hook: sz 6-1/32
head: 1/32oz, renegade tube head, 2 coats whit "natural pearl" nail polish
body:white marabou and mini orange marabou with some gold flashabou tied with ared orange 3/0 waxed mono cord. with a whip finish.
Attachments
100_1010_WinCE.jpg
100_1010_WinCE.jpg (34.5 KiB) Viewed 2995 times
100_1010_JIGS_295.jpg
100_1010_JIGS_295.jpg (268.88 KiB) Viewed 2987 times

User avatar
panfisher
Captain
Posts: 843
Joined: Mon May 07, 2007 6:50 am
Location: Yakima, WA

RE:Jigs Swap?

Post by panfisher » Fri Jan 25, 2008 6:49 pm

still trying to figure out the picture thing but the wife was able to put it on as a file](*,) <')//<

User avatar
travislikesfishing
Lieutenant
Posts: 251
Joined: Sat Jun 30, 2007 11:29 pm
Location: spokane

RE:Jigs Swap?

Post by travislikesfishing » Sat Jan 26, 2008 3:48 pm

im interested in a jig swap is it still going on
KEEP UR LINE TIGHT SO U CAN FEEL THE BITE!!!!!

Post Reply

Return to “Hardware How-to's and Swap Event”