Casting rod salmon/steelhead

A place for readers to talk about river fishing in Washington.
Forum rules
Forum Post Guidelines: This Forum is rated “Family Friendly”. Civil discussions are encouraged and welcomed. Name calling, negative, harassing, or threatening comments will be removed and may result in suspension or IP Ban without notice. Please refer to the Terms of Service and Forum Guidelines post for more information. Thank you
User avatar
akochman09
Petty Officer
Posts: 75
Joined: Thu May 07, 2009 6:17 pm
Location: Bellingham

RE:Casting rod salmon/steelhead

Post by akochman09 » Tue May 03, 2011 12:54 am

Yeah i used the guide select before i got my fetha styx. 9 6 medium light. I broke the tip section one day and walked into the store where i got it and the guy put a new top section on it, only cost me ten bucks. practically like getting a new rod.

morrisR/T
Angler
Posts: 3
Joined: Sat Feb 04, 2012 8:37 pm

Re: Casting rod salmon/steelhead

Post by morrisR/T » Fri Feb 17, 2012 11:47 pm

i agree, get a jim mercer rod, absolutely do not buy a fetha styx rod, their blanks are chinese made and they have the balls to put an american flag on em, and then talk crap on jim mercer for using rainshadow blanks, fetha styx is cheap overpriced garbage

User avatar
racfish
Rear Admiral Two Stars
Posts: 4701
Joined: Tue Oct 30, 2007 4:11 pm
Location: Seward Park area

Re: Casting rod salmon/steelhead

Post by racfish » Sat Feb 18, 2012 7:53 am

Get the 300.00 then go buy an Ugly Stick for 50.00 then take the 250.00 to the Casino and turn it in to a new boat with motor.Whatever happens you still have a new rod that is light and damn near impossible to break. :-" :-"

User avatar
goodtimesfishing
Captain
Posts: 641
Joined: Sat Sep 19, 2009 11:33 am
Location: Arlington

Re: Casting rod salmon/steelhead

Post by goodtimesfishing » Sat Feb 18, 2012 10:21 am

My sst tip was replaced under warrenty and the turn around was great. I think it might have been a total of 7-8 days from the day I sent the broken tip and that included weekend. I have a 9'6" sst and a 10'6" sst and would recommend them. I have not heard anyone talk bad about them and the price, warrenty, and quality are outstanding.

User avatar
Kockmandoo
Lieutenant
Posts: 233
Joined: Sun Aug 14, 2011 9:01 pm

Re: Casting rod salmon/steelhead

Post by Kockmandoo » Sat Feb 18, 2012 7:02 pm

i agree, get a jim mercer rod, absolutely do not buy a fetha styx rod, their blanks are chinese made and they have the balls to put an american flag on em, and then talk crap on jim mercer for using rainshadow blanks, fetha styx is cheap overpriced garbage
woah woah woah woah woah. not cool. haha. My fetha styx rod is sooooo unbelievably nice. they are light, sensitive, and strong. The sst's and guide select's are nice but for me no comparison. Not trying to start an argument obviously everybody is entitled to their opinion but I wouldn't call them garbage.

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5401
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Casting rod salmon/steelhead

Post by Bodofish » Sat Feb 18, 2012 7:10 pm

Yet still not even in the same league as an XRodz....
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
Kockmandoo
Lieutenant
Posts: 233
Joined: Sun Aug 14, 2011 9:01 pm

Re: Casting rod salmon/steelhead

Post by Kockmandoo » Sat Feb 18, 2012 7:59 pm

whats an xrodz? Is that like, x-rated rods, adults only? gotta pay 1.99$ a minute to use it?

User avatar
Amx
Vice Admiral Three Stars
Posts: 7351
Joined: Thu Jul 02, 2009 11:43 am
Location: Wa. state

Re: Casting rod salmon/steelhead

Post by Amx » Sat Feb 18, 2012 8:03 pm

http://search.yahoo.com/search;_ylt=Aku ... =yfp-t-504" onclick="window.open(this.href);return false;
Tom.

Occupation: old
Interests: living

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5401
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Casting rod salmon/steelhead

Post by Bodofish » Sat Feb 18, 2012 8:18 pm

Kockmandoo wrote:whats an xrodz? Is that like, x-rated rods, adults only? gotta pay 1.99$ a minute to use it?
It's Jim Mercer's Rod Company. He started it after Fetha Styx. Just about the sweetest rods you'll ever set eyes on.
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
goodtimesfishing
Captain
Posts: 641
Joined: Sat Sep 19, 2009 11:33 am
Location: Arlington

Re: Casting rod salmon/steelhead

Post by goodtimesfishing » Sat Feb 18, 2012 8:24 pm

better be at $499 each!!!

User avatar
OFFDAAHOOK
Captain
Posts: 704
Joined: Mon Nov 14, 2011 5:10 pm

Re: Casting rod salmon/steelhead

Post by OFFDAAHOOK » Sat Feb 18, 2012 8:45 pm

made in china i love it hahaha
I FISH THEREFORE I AM

User avatar
OFFDAAHOOK
Captain
Posts: 704
Joined: Mon Nov 14, 2011 5:10 pm

Re: Casting rod salmon/steelhead

Post by OFFDAAHOOK » Sat Feb 18, 2012 8:48 pm

Kockmandoo wrote:
i agree, get a jim mercer rod, absolutely do not buy a fetha styx rod, their blanks are chinese made and they have the balls to put an american flag on em, and then talk crap on jim mercer for using rainshadow blanks, fetha styx is cheap overpriced garbage
woah woah woah woah woah. not cool. haha. My fetha styx rod is sooooo unbelievably nice. they are light, sensitive, and strong. The sst's and guide select's are nice but for me no comparison. Not trying to start an argument obviously everybody is entitled to their opinion but I wouldn't call them garbage.
+1 they are light and sweet rodz for around 250$ even though they made in china i dont care haha
Attachments
2b-480x640.jpg
2b-480x640.jpg (40.07 KiB) Viewed 2033 times
I FISH THEREFORE I AM

User avatar
OFFDAAHOOK
Captain
Posts: 704
Joined: Mon Nov 14, 2011 5:10 pm

Re: Casting rod salmon/steelhead

Post by OFFDAAHOOK » Sat Feb 18, 2012 8:50 pm

goodtimesfishing wrote:My sst tip was replaced under warrenty and the turn around was great. I think it might have been a total of 7-8 days from the day I sent the broken tip and that included weekend. I have a 9'6" sst and a 10'6" sst and would recommend them. I have not heard anyone talk bad about them and the price, warrenty, and quality are outstanding.
hands down best bang for buck..thank god for china hahaha
I FISH THEREFORE I AM

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5401
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Casting rod salmon/steelhead

Post by Bodofish » Sat Feb 18, 2012 10:08 pm

goodtimesfishing wrote:better be at $499 each!!!

Last one you'll ever buy. Unconditionally guaranteed for life.
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
Steelheader112
Petty Officer
Posts: 20
Joined: Sat Dec 31, 2011 8:17 pm

Re: Casting rod salmon/steelhead

Post by Steelheader112 » Sun Feb 19, 2012 11:16 am

It's still steep for a rod. Thats 10 ssts and I've had my SSTS for 3 years... If you do the math thats 30 years worth of rods if you break one every 3 years. Plus they are durable rods, so if you get 5 years of use out of them thats 50years worth of rods for the price... Why can't made in America be cost effective???

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5401
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Casting rod salmon/steelhead

Post by Bodofish » Sun Feb 19, 2012 1:27 pm

Steelheader112 wrote:It's still steep for a rod. Thats 10 ssts and I've had my SSTS for 3 years... If you do the math thats 30 years worth of rods if you break one every 3 years. Plus they are durable rods, so if you get 5 years of use out of them thats 50years worth of rods for the price... Why can't made in America be cost effective???
So let me get this right........... Are you saying you wouldn't like an XRodz? Personally given the chance I'd take one over SST in a heart beat. If it's the price, you only live once and if fishing is your passion then $500 is nothing. As the rods I have go down, they will be replaced by Mr. Mercer. As you might surmise, none of the current stock is an SST....

[thumbsup] [thumbsup] There is no justifying an emotional purchase. It comes from desire and lust, boy is it a wonderful thing. [thumbsup] [thumbsup]
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

User avatar
OFFDAAHOOK
Captain
Posts: 704
Joined: Mon Nov 14, 2011 5:10 pm

Re: Casting rod salmon/steelhead

Post by OFFDAAHOOK » Sun Feb 19, 2012 1:35 pm

Steelheader112 wrote:It's still steep for a rod. Thats 10 ssts and I've had my SSTS for 3 years... If you do the math thats 30 years worth of rods if you break one every 3 years. Plus they are durable rods, so if you get 5 years of use out of them thats 50years worth of rods for the price... Why can't made in America be cost effective???
+1 ...heres your answer why cant america be cost effective..theres billions of chinese hahahah
Attachments
JeremyLin[021612]_345x259_1.jpg
JeremyLin[021612]_345x259_1.jpg (61.41 KiB) Viewed 2004 times
I FISH THEREFORE I AM

Kokaholic
Angler
Posts: 4
Joined: Fri Nov 04, 2011 10:03 am

Re: Casting rod salmon/steelhead

Post by Kokaholic » Sun Feb 19, 2012 4:23 pm

I have been fishing the entire NW & Canada for 30 years. :-k Think it out you have so many options, Lamiglas, GLoomis, Shimano, Xrod, etc and so forth. Ya you can spend 500.00 on a new rod, but after 30 years of fishing I wouldn't. Before you go spend 500.00 on 1 rod. take a look a the New 2012 Shimano Claris rods price 129.99. You have a option to get a great rod which I've already tested for Shimano. If you were thinking of a casting rod how about 10' salmon & steelhead. :-k
Clarus Salmon Steelhead
Construction
IM-8 Graphite Construction
Components
Fuji Aluminum Oxide Guides
Custom Shimano Reel Seats
Warranty
Over-The-Counter Limited Lifetime Warranty
CSC90H2B 9'0" Heavy Moderate 10-30lb 15-40 1-6oz Cork Fuji Aluminum Oxide 13.0" 3.5"
CSC96H2B 9'6 Heavy Moderate 10-30lb 15-40 1-6oz Cork Fuji Aluminum Oxide 13.0" 3.5"
CSC100H2B 10'0" Heavy Moderate 10-30lb 15-40 1-6oz Cork Fuji Aluminum Oxide 13.0" 3.5" [thumbup] its all up to you.

User avatar
Kockmandoo
Lieutenant
Posts: 233
Joined: Sun Aug 14, 2011 9:01 pm

Re: Casting rod salmon/steelhead

Post by Kockmandoo » Sun Feb 19, 2012 6:15 pm

heavy action 10 ft 15-40lb test rated?????? ewwwwwwww. thats heavier than my downrigger rods.

User avatar
Bodofish
Vice Admiral Three Stars
Posts: 5401
Joined: Sun Apr 29, 2007 12:59 pm
Location: Woodinville
Contact:

Re: Casting rod salmon/steelhead

Post by Bodofish » Sun Feb 19, 2012 7:01 pm

Well I guess it's time. You guys pick the rods you like and I'll pick the ones I like. I'm absolutely sure who's going to do the most enjoying........ it's in my nature.

All the justification going on for an item that ultimately gives us a lot of pleasure. Personally I'd rather not justify my pleasures, nor do I like to settle when it comes to them. I did a lot of settling in the earlier part of my life so my kids didn't have to. Now it's my turn. [flapper] [flapper] [flapper] [flapper] [flapper]


:cheers: He who dies with the best toys wins. :cheers:
Build a man a fire and he's warm for the night. Light a man on fire and he's warm the rest of his life!

Post Reply