Page 1 of 2

RL's 10ft jon (Mod Thread)

Posted: Tue May 31, 2011 8:42 pm
by rl206
Hi guys just noticed this section and was workin on the boat so I thought I'd post it.

I like reading builds off Tinboats.com so figured I'd do something like that too...

I bought a 10ft Lowe Line off another member about a month ago, I finally started in on it.

Heres pretty much how I bought it on day 1

Image

I took it out briefly to get a feel for it, It leaked in multiple spots, so I decided first things first, its gotta float so the bottom was where I started.


Starting on the bottom of the boat and work from there.

I knew it was going to be fun because of all the silicone that was everywhere.

I began with sanding it, all the rivets were wobbly to the touch so after sanding i used razor blades and exacto knives to remove as much as I could

Image


I squeezed in a play day w/ it and got rewarded w/ its first and only fish in it since I've been in possession of it
Image

Day 2
After work I marked all loose rivets w/ a sharpie and drilled them out, I used 3/16 rivets.

You can see all the white marine epoxy on the rivets that got replaced

Image

I plan on getting the bottom finished, check for leaks and truck bed liner the bottom and sides up to the first rib,
Will keep this updated as much as I can!

RE:RL's 10ft jon (Mod Thread)

Posted: Tue May 31, 2011 9:30 pm
by Mike Carey
fun project!

RE:RL's 10ft jon (Mod Thread)

Posted: Tue May 31, 2011 9:36 pm
by tnj8222
I sold that to another member of wash lakes haha also bought it from another member here. It didnt leak last time I used it but it sat in my brother inlaws yard all winter full of water. Im sure thats why the rivits and silicone didnt hold. I didnt do the repair work on it
. Just saying lol. That boat has been through atleast five members on washington lakes.

Seriously dude I caught about 800-1000 bass on that boat. Took it to potholes moses and lots of seep lakes. I would have kept it if it was bigger.

RE:RL's 10ft jon (Mod Thread)

Posted: Tue May 31, 2011 9:40 pm
by rl206
Haha thats rediculous, well itll fit in the back of my 4runner so its what I have to deal w/ for now.

I will have room for a trailer by next year so itll probably go to another member sooner or later, but I figured it will be a fun and good boat to learn on for my next one,

Off topic but tnj Im pretty sure I drive by you from time to time on my lunch breaks by ikea, is that you?

RE:RL's 10ft jon (Mod Thread)

Posted: Tue May 31, 2011 9:41 pm
by tnj8222
rl206 wrote:Haha thats rediculous, well itll fit in the back of my 4runner so its what I have to deal w/ for now.

I will have room for a trailer by next year so itll probably go to another member sooner or later, but I figured it will be a fun and good boat to learn on for my next one,

Off topic but tnj Im pretty sure I drive by you from time to time on my lunch breaks by ikea, is that you?
Thats me. Stop by and get food man no charge!

RE:RL's 10ft jon (Mod Thread)

Posted: Tue May 31, 2011 11:18 pm
by rjn cajun
Sorry RL about the topic changer.No free food but I`m sure I drive by you everyday also as the office and shop are right by there. I go by there at least twice a day. This should be a great thread to see and learn from. I`m thinking about doing my boat so this could give some ideas. Back to topic.

RE:RL's 10ft jon (Mod Thread)

Posted: Wed Jun 01, 2011 3:28 pm
by rl206
tnj: Are you at jersey's?

rin cajun: Wow, small world haha. What kind of boat do you have?

But for an update, I was skeptical at first and kind of still am but decided to do it anyways.
I got the $90 Herculiner kit at Auto Zone.

Here are some pics after about 30mins (from last night)

Image

Image

I plan on going up to the first rib on the sides due to the amount of rivets, and that the majority of them need to be replaced, just for aesthetics, ill do the bow portion and halfway up on the transom.

I have more pics but am off to work, will upload tonight...

RE:RL's 10ft jon (Mod Thread)

Posted: Wed Jun 01, 2011 5:24 pm
by rjn cajun
RL I have a 10ft Livingston. Not aluminum like yours. Mine seems to be alot harder to do things with since it`s a tri hull and fiberglass. I just want to put a casting deck and a couple other mods to it but I don`t have the balls to touch it and risk not bass fishing since that`s my only boat. I did do the Rhino Linning last year and it works great except in the summer when it`s hot. Then it feels like it`s 200 in the boat. Not sure how smart that was but it did sturdy it up a bit.

RE:RL's 10ft jon (Mod Thread)

Posted: Wed Jun 01, 2011 6:28 pm
by tnj8222
Yup im the gm here.

Boat looks alot better already!

RE:RL's 10ft jon (Mod Thread)

Posted: Wed Jun 01, 2011 7:14 pm
by rjn cajun
tnj8222 wrote:Yup im the gm here.

Boat looks alot better already!
Well now ya got a new customer. Like I said above I drive by there at least twice a day and now a new stop a couple times a week.[drool]

RE:RL's 10ft jon (Mod Thread)

Posted: Wed Jun 01, 2011 7:48 pm
by tnj8222
rjn cajun wrote:
tnj8222 wrote:Yup im the gm here.

Boat looks alot better already!
Well now ya got a new customer. Like I said above I drive by there at least twice a day and now a new stop a couple times a week.[drool]
Right on. Will send you a pm with my number. I will give you a few free lunch cards. If you like east coast subs you will love jersey mikes.
That goes for all wa lakes members pm me I will hook you up.
Sorry rl206 for the hijacked thread.

RE:RL's 10ft jon (Mod Thread)

Posted: Wed Jun 01, 2011 9:31 pm
by BassinBomber
Yep I got it from TnJ and now Ryan has it,..been through alot of us,..sadly I didn't take it out on the water before I sold it to you Ryan so all I knew is it was water tight,..well at least you're making good progress and learning from all the work being done,..I must say it looks 100% better and it'll be great for the next person,..GOOD JOB! When you start to deck it I'll be paying close attention as I have a 14'Jon I want to deck too!

BB

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 4:45 am
by rl206
Tnj: Jersey Mikes! I go there all the time haha, in fact went there today, never thought anything good could come from the Jersey shore :safe:
But im not gonna lie i saw your sticker on the truck so i did look around for that pond but theres just an open grass field...
Today there were a few people shootin bow and arrow it was pretty nuts


Bassinbomber: Dont worry about it, im sure I would have done everything i did to it anyways, plus a buddy happened to have a rivet gun, rivets and lots of other tools haha

But...

Herculiner's instr. claim 1-4 days setting time, 24hrs and it's ready for "light use"

I figure w/ the rain and humidity it'll probably be close to 4 days but had a chance to let it get some sun

Image

A close up... This pic was about 14hrs afterward, still spongy to the touch

Image

On a side note, before I redid the rivets it leaked from well, everywhere. After replacing, took it to a local lake for about an hr and confirmed leakage from only 2 spots, so was happy to see all of my new rivets w/ marine epoxy held.
I hope the Herculiner does the rest after touching it up.

Its really porous and I think ill be happy w/ it for $90 as well as it helping w/ the leaking from the transom.
I figured it could take some "light use" and flipped it over and did some really brief brainstorming w/ cardboard...
(cardboard wasnt trimmed up to fit 100% just stood back to take a pic, and the dog got her tennis ball stuck behind the bike)

Image

Decking is still a ways out but am trying to get realistic ideas, because ive heard and read all of the 1032 & 1232 horror stories...

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 5:02 am
by rl206
tnj8222 wrote:
Seriously dude I caught about 800-1000 bass on that boat. Took it to potholes moses and lots of seep lakes. I would have kept it if it was bigger.
By the way...
How did it do on the big lakes? Im assuming on the days w/ no wind [confused]

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 12:14 pm
by tnj8222
rl206 wrote:
tnj8222 wrote:
Seriously dude I caught about 800-1000 bass on that boat. Took it to potholes moses and lots of seep lakes. I would have kept it if it was bigger.
By the way...
How did it do on the big lakes? Im assuming on the days w/ no wind [confused]
My brother in law is over 300 pounds im about 200 with batterie and gear we were ok. This was lower goose seep lakes. I never took it out on a big lake, bought a bass boat for that lol.

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 12:48 pm
by Mike Carey
BassinBomber wrote:Yep I got it from TnJ and now Ryan has it,..been through alot of us,..sadly I didn't take it out on the water before I sold it to you Ryan so all I knew is it was water tight,..well at least you're making good progress and learning from all the work being done,..I must say it looks 100% better and it'll be great for the next person,..GOOD JOB! When you start to deck it I'll be paying close attention as I have a 14'Jon I want to deck too!

BB
too funny, a WL.com "pass around a share" boat. I like it. Liner looks good, but curious - not doing the insdie as well?

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 1:30 pm
by rl206
Mike Carey wrote:
BassinBomber wrote:Yep I got it from TnJ and now Ryan has it,..been through alot of us,..sadly I didn't take it out on the water before I sold it to you Ryan so all I knew is it was water tight,..well at least you're making good progress and learning from all the work being done,..I must say it looks 100% better and it'll be great for the next person,..GOOD JOB! When you start to deck it I'll be paying close attention as I have a 14'Jon I want to deck too!

BB
too funny, a WL.com "pass around a share" boat. I like it. Liner looks good, but curious - not doing the insdie as well?
Well im still on the fence about that, I wasnt sure how hard that would make it to do the rivets again if it needed to be done, I mainly did it for durability and to help w/ the leaking issue.

I go to East. Wa a lot and i dont want my shoes to melt, because im not sure how im decking it yet. Im still worried about how tippy it will be, last time out we put both batteries in the middle section on each side and it seemed to help a lot.

Ill finish the outside and see how much left I have

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 3:59 pm
by tnj8222
Its not to tippy as is, but I put in a casting deck then removed it because I didnt feel safe. Especially when I hook a pig and forgot about safety.

I wouldnt rhino line the inside, that stuff gets hot and will make you sweat big time. I would repaint it though.

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 4:02 pm
by tnj8222
BassinBomber wrote:Yep I got it from TnJ and now Ryan has it,..been through alot of us,..sadly I didn't take it out on the water before I sold it to you Ryan so all I knew is it was water tight,..well at least you're making good progress and learning from all the work being done,..I must say it looks 100% better and it'll be great for the next person,..GOOD JOB! When you start to deck it I'll be paying close attention as I have a 14'Jon I want to deck too!

BB
Before me it was bavnuts before him tdots and I believe tdot got it from another member

RE:RL's 10ft jon (Mod Thread)

Posted: Thu Jun 02, 2011 4:02 pm
by rl206
Before work update, got one side sanded and only one rivet to replace only took 45 mins.

Image

Image

Image